Brass Pepper Grinder | Hatch‑Door

Your mill will need some regular care and maintenance to keep it in good working order. It's important to clean the mill regularly, keep its contents fresh and avoid exposure to moisture. Never wash the mill in water or in the dishwasher! Below are some more detailed guidelines for use and maintenance.

Instructions for Use

Only use the mill for grinding ingredients it was intended for.

Pepper mills are designed for grinding standard peppercorns, but may also be used to grind dry spices. Generally it is not recommended to grind larger peppercorns or spices with a soft core in these mills. Never grind salt in a mill intended for pepper, as this will corrode the metal mechanism.

Inserting Ingredients:
The mill has a unique trap door at the side for inserting peppercorns.

Adjusting the Grind

The mill is adjusted by turning the knob at top. Tighten the knob clockwise for a finer grind.

Cleaning Internal Parts

NEVER WASH THE MILL IN WATER OR IN THE DISHWASHER !

Regular cleaning will help maintain your mill in good working condition. Take the opportunity to give the mill a clean whenever you've taken it apart to refill the contents. The mills are designed to be easily disassembled for maintenance. Take the mill apart completely to remove any contents and thoroughly clean all parts.

After removing the top knob and handle, the grinding mechanism and central shaft should also be removed from the body of the mill. The mill can be disassembled by removing screws to the underside of the mill.

Once the mill is disassembled, give all the parts a good clean with a small brush and dry cloth. Only the plastic parts of the salt grinders can be cleaned separately in water to dissolve any clogged salt. All parts should be thoroughly clean and dry before reassembling.

Any corrosion occurring inside the mill should be controlled while the mill is disassembled for cleaning. See below for more information on controlling corrosion.

Cleaning and Polishing the Exterior

Brass and copper are naturally resistant to corrosion, but like all metals, they will inevitably oxidise and change in appearance with touch and with use and through exposure to moisture and oxygen in the air. The change in appearance is unpredictable and might occur in different ways on different parts of the mill. This process is part of the nature of the metal and brings with it an attractive patina of use, but will need to be managed with some regular care.

If you prefer to retain a bright polished look, brass and copper can be polished with an ordinary metal cleaner (such as Brasso or similar) using a soft cloth to polish the outside of the mill.

Controlling Corrosion

Care should be taken to avoid exposure to moisture. Never wash or submerge the mill in water and do not wash in the dishwasher. Store the mill in a cool dry place. Exposure to moisture or humid environments may lead to more extreme corrosion such as bright green-blue to grey colourations, which are best removed. Corrosion may also sometimes occur inside the mill or between metal parts for example between the lid and the body of the mill, which can be checked and cleaned when refilling the contents.

There are a variety of proprietary metal cleaners on the market suitable for cleaning brass and copper (for example Brasso or Glanol). Alternatively you could make your own cleaning paste from ingredients in the kitchen. Some people suggest using a paste from 3 parts lemon juice and one part salt (or baking soda) rubbed into the affected metal with a clean cloth. A scourer or fine steel wool may be used to remove more substantial corrosion, but may also scratch the metal. A mix of salt and vinegar is also an alternative suggested by some. We've found a vinegar bath to be quite effective in removing rust and brightening up the metal surface. Be sure to dry thoroughly after cleaning with a soft dry cloth. Give the mill a final polish with a proprietary metal cleaner, or wipe with camellia oil to help inhibit further corrosion.

Camellia oil has traditionally been used in Japan to help protect knives and blades from rust and tarnish and can be used on your uncoated mill to help inhibit corrosion, especially where it can develop unnoticed between the lid and the body. After cleaning and before putting the parts back together, wipe the metal parts thoroughly with a soft cloth dipped in camellia oil.

Within Australia

• Standard Shipping: $15 (or $8 for small items) — 2–8 business days
• Express Shipping: $30 — 1–4 business days
• Free Shipping on orders over $200 — 2–8 business days

International

• Standard Shipping: $100 — 7–15 business days

Notes

• We deliver to PO Boxes
• Delays may occur due to weather or postal disruptions

View full shipping and returns information here

- Returns accepted within 21 days (Australia) / 30 days (International)
- Items must be unused, unwashed, and in sellable condition
- Sale items cannot be returned unless faulty
- Shipping costs are non‑refundable
- Returns are at the customer’s expense
- Refunds processed to original payment method once approved

How to Return
- Email info@cravewares.com.au for approval before sending anything back
- Send items securely packaged with tracking
- Allow 3 working days for processing once received

View full shipping and returns information here

Need help?

Feel free to contact us:
Mondays-Saturday: 9:30am-5:30pm
Sunday: 10:00am-3:00pm
Phone: (02) 9328 6429
Email:info@cravewares.com.au

Access our Help Centre here